Description
Xtendor®: Groundbreaking Plow Guards
Xtendor® Plow Guards were the industry’s first snow plow curb guards designed specifically for contractors. Installed on the outside edge of the plow blade, they are perfect for windrowing applications on nearly any straight blade plow make or model.
Winter designed Xtendor® Plow Guards to install on the left and right outside edges of the plow blade, which are subjected to the highest wear. The curb guards enable the cutting edge to wear evenly so you’re using the entire blade, not just part of it. Reducing uneven wear increases the overall life of the blade, decreases in-season blade changes and protects your equipment investment.
The end portion of the Xtendor® Plow Guard is cast steel made with a proprietary alloy. The casting has the same hard wearing characteristics as an excavator bucket tooth. It is reinforced on the side and bottom with protective Impervium® carbide to further reduce downtime and maintenance costs.
Unbeatable Wear Protection
Windrowing operations create excessive wear on ends of the cutting edge. Xtendor® Plow Guards protect the moldboard and blade from uneven wear. Our Impervium® carbide reinforces the blade to promote even wear and extend blade life. Xtendor® Plow Guards also provide protection from curb damage.
Key Xtendor® Features
- Reduces Replacements: Designed to protect against premature and uneven wear typically seen on blade ends and moldboard corners.
- Uses High Quality Carbide: Impervium® carbide reduces maintenance costs and downtime.
- Protects Your Plow Blade Investment: Ultimate plow edge protection has been proven to decrease plow damage.
- Fits OEM Plows: Plow guards that fit OEM plows including BOSS®, Western®, Fisher®, SnowDogg®, SnowEx®, and Meyer®.
Curb Guard Hardware Included
Xtendor® Plow Guards come with hardware for both 1/2” and 5/8”
- 4 – 1/2″ Hex Head Bolts
- 4 – 1/2″ Flat Washers
- 4 – 1/2″ Stover Lock Nuts
- 4 – 5/8″ Hex Head Bolts
- 4 – 5/8″ Flat Washers
- 4 – 5/8″ Stover Lock Nuts
You must drill your own holes to install the guards. Drilling instructions are available in the documents tab as a PDF.
The curb guards have a wrap-around piece that butts up against the cutting edge, allowing you to locate the guard correctly before drilling the holes. The rectangular part of the guard is made of 1/4″ mild steel for easy drilling.
Best Used For
- Roads: Concrete, Chip-Seal, Asphalt
- Speed: High, Medium, Low
- Plow Type: Front, straight
- Angle of Attack: 70°
Our Xtendor® snow plow curb guards are suitable for truck equipment and adapt well with UTV, skid steer, and loader applications.
Maximize time on the road with these unique guards, designed to protect against premature wear and eliminate in-season blade changes.
Long-term Protection with Xtendor® Curb Guards
At Winter Equipment, we believe in the longevity and durability of our products, that’s why the Xtendor® Plow Guards come with a solid warranty. Be it for your v-plow or straight plow, our guards serve as a steadfast defense against winter’s harsh conditions. The Xtendor® Plow Guards are a reliable choice for those seeking the best snow plow curb guards. Their durability, combined with our vast selection of replacement parts, ensures that your winter operations never reach a standstill.
Compatible with various snow plow parts, including the MVP, or XLS, the Xtendor® Plow Guards are a versatile and crucial addition to your winter arsenal. The guards, built with a heavy-duty carbide cutting edge, are resilient and ready to stand up against the harshest winter conditions. Their comprehensive edge kit includes all necessary adapters, washers, and gaskets for a seamless installation.
Xtendor®: Groundbreaking Plow Guards
Xtendor® Plow Guards were the industry’s first snow plow curb guards designed specifically for contractors. Installed on the outside edge of the plow blade, they are perfect for windrowing applications on nearly any straight blade plow make or model.
Winter designed Xtendor® Plow Guards to install on the left and right outside edges of the plow blade, which are subjected to the highest wear. The curb guards enable the cutting edge to wear evenly so you’re using the entire blade, not just part of it. Reducing uneven wear increases the overall life of the blade, decreases in-season blade changes and protects your equipment investment.
The end portion of the Xtendor® Plow Guard is cast steel made with a proprietary alloy. The casting has the same hard wearing characteristics as an excavator bucket tooth. It is reinforced on the side and bottom with protective Impervium® carbide to further reduce downtime and maintenance costs.
Unbeatable Wear Protection
Windrowing operations create excessive wear on ends of the cutting edge. Xtendor® Plow Guards protect the moldboard and blade from uneven wear. Our Impervium® carbide reinforces the blade to promote even wear and extend blade life. Xtendor® Plow Guards also provide protection from curb damage.
Key Xtendor® Features
- Reduces Replacements: Designed to protect against premature and uneven wear typically seen on blade ends and moldboard corners.
- Uses High Quality Carbide: Impervium® carbide reduces maintenance costs and downtime.
- Protects Your Plow Blade Investment: Ultimate plow edge protection has been proven to decrease plow damage.
- Fits OEM Plows: Plow guards that fit OEM plows including BOSS®, Western®, Fisher®, SnowDogg®, SnowEx®, and Meyer®.
Curb Guard Hardware Included
Xtendor® Plow Guards come with hardware for both 1/2” and 5/8”
- 4 – 1/2″ Hex Head Bolts
- 4 – 1/2″ Flat Washers
- 4 – 1/2″ Stover Lock Nuts
- 4 – 5/8″ Hex Head Bolts
- 4 – 5/8″ Flat Washers
- 4 – 5/8″ Stover Lock Nuts
You must drill your own holes to install the guards. Drilling instructions are available in the documents tab as a PDF.
The curb guards have a wrap-around piece that butts up against the cutting edge, allowing you to locate the guard correctly before drilling the holes. The rectangular part of the guard is made of 1/4″ mild steel for easy drilling.
Best Used For
- Roads: Concrete, Chip-Seal, Asphalt
- Speed: High, Medium, Low
- Plow Type: Front, straight
- Angle of Attack: 70°
Our Xtendor® snow plow curb guards are suitable for truck equipment and adapt well with UTV, skid steer, and loader applications.
Maximize time on the road with these unique guards, designed to protect against premature wear and eliminate in-season blade changes.
Long-term Protection with Xtendor® Curb Guards
At Winter Equipment, we believe in the longevity and durability of our products, that’s why the Xtendor® Plow Guards come with a solid warranty. Be it for your v-plow or straight plow, our guards serve as a steadfast defense against winter’s harsh conditions. The Xtendor® Plow Guards are a reliable choice for those seeking the best snow plow curb guards. Their durability, combined with our vast selection of replacement parts, ensures that your winter operations never reach a standstill.
Compatible with various snow plow parts, including the MVP, or XLS, the Xtendor® Plow Guards are a versatile and crucial addition to your winter arsenal. The guards, built with a heavy-duty carbide cutting edge, are resilient and ready to stand up against the harshest winter conditions. Their comprehensive edge kit includes all necessary adapters, washers, and gaskets for a seamless installation.
Bill Marosits –
I am a snowplow subcontractor for my local municipality. A few years ago the head of the DPW asked me about the orange things on my plow, I told him about Winter Equipment Xtenders. And how I lost track of how many seasons my cutting edge has lasted with the Xtenders.
Now all of the DPW plows have Winter Equipment Xtenders on them.
Dave S, Somerset –
The extenders lasted for 2+ years. They showed very little wear and have worked awesome for us.
Brenda –
We love the xtendors. We have reduced our blade changes and have had these on for a long time now. We will keep getting these guards.
Terry, Madison Heights, MI –
Since we’ve added xtendors along with your hardened blades we are getting seasons out of the blades now. A huge money saver!
Mike W – Landmark Maintenance & Construction –
So happy with these! They reduce downtime, and costs. We make sure that every time we set up a new blade that the extendor guards are on them. They double the lifetime of the blade
Snow Dogg MD75 –
Great product! Me and my husband (Cliff) where very impressed with our sale rep Ty and will be using them again they where very knowledgeable. Was very pleased with product.
Chuck S –
AMAZING! The extenders have been amazing. Since we put them on we have not had to change blades in over 3 years.
Doug O’Bryan –
we have been using the winter equipment carbide edges on our blizzard plows for years, they do exactly as advertised!
Cliff Scoville –
I bought Universal winter extenders for my plow and I am very pleased with the product